Posted on Leave a comment

New Home Personalised Ornaments

New Home Personalised Ornaments
New Home Personalised Ornaments

New Home Personalised Ornaments – Love love love these! They’ll look gorgeous on the Christmas tree this year.

To clarify this Christmas ornament project was created on a Cricut Maker.

New Home Personalised Ornaments

Materials

Firstly, you will need an acrylic blank ornament. The ornament shown in the pictures for example, is a mirrored or white 8cm Acrylic 3mm thick circle from Woodform Crafts. Here is the link:

Rose Gold Mirrored – https://www.woodformcrafts.co.uk/product/10-x-rose-gold-mirror-acrylic-8cm-hanging-circle-wc1061/

White – https://www.woodformcrafts.co.uk/product/10-x-white-acrylic-8cm-hanging-circle-wc1061/

Secondly, you will need a Cricut machine and you will need to customise the file in Cricut Design Space. Subsequently, to access this you may need a Cricut Access subscription. Link to my file:

https://design.cricut.com/landing/project-detail/5f92d464737f400c4cc65575

Note: This design file contains a non-Cricut font for Christmas and the names. You can change the font to one you already have access to, or download the font I have used. The font used is called ‘Alberto’ and you can download this free from Fontbundles.net, here is the link:

https://fontbundles.net/free-fonts/script-fonts/albertho#gtmList=5&gtmPos=7

Before clicking ‘Make it’ hide the 8cm back circle and select all of the design, then WELD.

Furthermore, you will also need a 10cm piece of permanent vinyl for this project. This is the link for the vinyl I have used in this project (I used the black sheets out of this pack)

https://www.amazon.co.uk/First-Adhesive-Pack-Gloss-12-Colours-52-Transfer/dp/B07WGVPC1L

New Home Personalised Ornaments
New Home Personalised Ornaments

Process

Start the project by loading the Cricut machine with the mat and vinyl then press start to cut. Above all please make sure that you use the correct material settings for the vinyl being used.

As soon as the Cricut has finished cutting, eject the mat and carefully remove the cut vinyl sheet. At this stage you can proceed to weed your design.

TIP: for small writing, intricate designs etc. place transfer tape over the whole design before weeding it. Turn the design over, take the backing paper off and weed straight off of the transfer sheet. As a result this keeps all the tiny letters firmly stuck down and stops them moving about.

Lastly, you will need approximately 15cm of ribbon or cord to make the hanger for your ornament. I prefer the cord for a neater finish, links for both the cord and organza ribbon are below:

Cord – https://www.hobbycraft.co.uk/black-ribbon-knot-cord-2mm-x-10m/568020-1003

Organza ribbon – https://www.hobbycraft.co.uk/black-organdie-ribbon-6mm-x-8m/569762-1003

Furthermore if you don’t use or have a Cricut machine, these Acrylic Ornaments are for sale in my facebook shop Beejui Creations | Facebook

Check out my other designs of Acrylic Ornament Posts:

Notice: The pattern and images on this page are for personal use only. Do not copy, sell, translate or distribute these images or pattern in any way. Please feel free to share this blog post and give credit to Beejui Creations as the designer, if sharing your completed project anywhere.  Thank you!