Posted on Leave a comment

3D Mandala Letter ‘B’ – Free SVG Link

Purple letter B in mandala style

3D Mandala Letter ‘B’ – Free SVG Link. Another great mandala project. This was a really fun project, I really enjoyed making this for my craft room.

3D Mandala Letter 'B' - Free SVG Link
3D Mandala Letter ‘B’ – Free SVG Link

To make this project you will need:

Cricut Maker

Cricut design space

3D Mandala Letter SVG (link below)

5 different colours of card

I used all 5 colours from the A4 Premium Card Pack – Purple Shades from hobbycraft. They have loads of lovely colours in this range.

Link to the card I used: https://www.hobbycraft.co.uk/purple-premium-card-a4-50-pack/626609-1011

(I am not affiliated with hobbycraft, I just love their stuff lol)

Adhesive Spray

I used adhesive spray for this project. All layers except the very top one I have used the adhesive spray on. This gives a flat kind of look to the project.

(NOTE: Open the window and cover your workspace, this spray smells really strong and even though I had a A3 pad covering my workspace it still got everywhere lol).

The adhesive spray that I used is not showing online but I bought from Hobbycraft and it was called ‘Permanent Adhesive Spray 200ml’

If you want a more 3D look use foam pads in between the layers. (NOTE: try to hide the foam pads under each layer by cutting them to size so you can’t see them).

Self Adhesive Vinyl for the very top layer

I used the light purple out of this pack from Amazon : https://www.amazon.co.uk/gp/product/B07WGVPC1L/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I find that the very top layer has very small intricate cuts and the foam pads/glue is hard work to get it to adhere. So you can either cut out of card and spray glue the top layer on to the layer below or use the self adhesive vinyl.

Blue Light Grip Cricut Mat

I used the blue light grip mat for all the layers.

Settings:

Cricut settings

I made the SVG smaller to fit the paper I had – 20cm wide x 18.5cm length.

Material setting for the self adhesive vinyl – PREMIUM VINYL

Material setting for the other layers – LIGHT CARDSTOCK – 60lb (163gsm)

NOTE: there may be better settings but these are the ones that worked for me.

Here is the link for this gorgeous mandala letter SVG file:

https://specialheartstudio.com/free-layered-alpha-mandala-svg-set/

3D Mandala Letter 'B' - Free SVG Link
3D Mandala Letter ‘B’ – Free SVG Link

Check out my other posts for more 3D Mandala Letter SVG links and more:

Posted on Leave a comment

3D Mandala Letter ‘I’ – Free SVG Link

3D Mandala Letter ‘B’ – Free SVG Link. Another great mandala project. This was a really fun project, I really enjoyed making this for my craft room.

3D Mandala Letter 'I' - Free SVG Link
3D Mandala Letter ‘I’ – Free SVG Link

To make this project you will need:

Cricut Maker

Cricut design space

3D Mandala Letter SVG (link below)

5 different colours of card

I used all 5 colours from the A4 Premium Card Pack – Turquoise Shades from hobbycraft. They have loads of lovely colours in this range.

Link to the card I used: https://www.hobbycraft.co.uk/turquoise-premium-card-a4-50-pack/626609-1008

(I am not affiliated with hobbycraft, I just love their stuff lol).

Foam pads

I used adhesive foam pads for this project. All layers except the very top one I have used the foam pads to give a bit of depth to the project.

(NOTE: try to hide the foam pads under each layer by cutting them to size so you can’t see them).

Link to adhesive foam pads: https://www.hobbycraft.co.uk/white-adhesive-foam-pads-25mm-x-12mm-x-2mm-40-pieces/606180-1000

If you want a flat look use adhesive spray in between the layers. (NOTE: Open the window and cover your workspace, this spray smells really strong and even though I had a A3 pad covering my workspace it still got everywhere lol).

The adhesive spray that I use is not showing online but I bought it from Hobbycraft and it was called ‘Permanent Adhesive Spray 200ml’

Self Adhesive Vinyl for the very top layer

I used the light blue out of this pack from Amazon : https://www.amazon.co.uk/gp/product/B07WGVPC1L/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I find that the very top layer has very small intricate cuts and the foam pads just wont work to adhere. So either cut out of card and glue the top layer on to the layer below or use self adhesive vinyl.

Blue Light Grip Cricut Mat

I used the blue light grip mat for all the layers.

Settings:

Cricut settings

I made the SVG smaller to fit the paper I had – 20cm wide x 18.5cm length.

Material setting for the self adhesive vinyl – PREMIUM VINYL

Material setting for the other layers – LIGHT CARDSTOCK – 60lb (163gsm)

NOTE: there may be better settings but these are the ones that worked for me.

Here is the link for this gorgeous mandala letter SVG file:

https://specialheartstudio.com/free-layered-alpha-mandala-svg-set/

3D Mandala Letter 'I' - Free SVG Link
3D Mandala Letter ‘I’ – Free SVG Link

Check out my other posts for more 3D Mandala Letter SVG links and more:

Posted on Leave a comment

Floral 3D Dream Catcher – Layered SVG Link

Floral 3D Dream Catcher – Layered SVG Link. Another great mandala project. This was a really fun project, I really enjoyed making this for my craft room.

I love how this turned out in black & white.

Floral 3D Dream Catcher - Layered SVG Link
Floral 3D Dream Catcher – Layered SVG Link

To make this Floral 3D Dream Catcher – Layered SVG project

You will need:

Cricut Maker

Cricut design space

2 sheets of black cardstock

2 sheets of white cardstock

Self Adhesive Vinyl – 1 sheet of black and 1 sheet of white vinyl

I used the white and black vinyl sheets in this pack from Amazon:

https://www.amazon.co.uk/gp/product/B07WGVPC1L/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I find that the very top layer has very small intricate cuts and the foam pads/glue is hard work to get it to adhere. So you can either cut out of card and spray glue the top layer on to the layer below or use the self adhesive vinyl.

Adhesive Spray and / or adhesive foam pads

I used adhesive spray for this project. All layers except the very top layers which I have used self adhesive vinyl on. This gives a flat kind of look to the project.

(NOTE: Open the window and cover your workspace, this spray smells really strong and even though I had a A3 pad covering my workspace it still got everywhere lol).

The adhesive spray that I used is not showing online but I bought from Hobbycraft and it was called ‘Permanent Adhesive Spray 200ml’

If you want a more 3D look use foam pads in between the layers. (NOTE: try to hide the foam pads under each layer by cutting them to size so you can’t see them).

Blue Light Grip Cricut Mat

I used the blue light grip mat for all the layers.

Floral 3D Dream Catcher SVG

I used this purchased SVG file from https://designbundles.net/ :

https://designbundles.net/elinorka/571980-3d-layered-dream-catcher-multi-layer-boho-svg-cut-

Floral 3D Dream Catcher Notes:

There is 6 layers to this project.

I chose to glue the bottom 2 layers of both the larger and smaller cardstock pieces together and used the self adhesive vinyl to make the detailed top pieces. I then put adhesive foam pads in between these layers for a 3D effect.

Next time I make this project I think I will add foam pads to most of the layers and see what it looks like then. I might even bling it up a bit with some glitter card stock and see how it turns out.

Floral 3D Dream Catcher - Layered SVG Link

Floral 3D Dream Catcher Cricut Settings:

You may have to adjust the SVG to fit the paper you have.

Material setting for the self adhesive vinyl – PREMIUM VINYL

Material setting for the other layers – LIGHT CARDSTOCK – 60lb (163gsm)

NOTE: there may be better settings but these are the ones that worked for me.

Check out my other posts for more 3D Mandala Letter SVG links and more:

Posted on Leave a comment

3D Mandala Owl – White, Silver & Lilac Cardstock

Another card mandala I’ve made.

This one was a nightmare! Silver card was rubbish to cut, rubbish to weed …. just a complete load of rubbish in general lol. Next time I’ll do the silver in vinyl, I’m sure it will be so much easier!

But it did turn out nice in the end. I love the eye colour, it sets off the white & silver really well.

I can’t share the link to the SVG file for this but it is from a Cricut group on Facebook.

Posted on Leave a comment

3D Mandala Grey Wolf – Layered Free SVG

3D Mandala Grey Wolf – Layered SVG Project. Another amazing mandala project. This was a really fun project, I really enjoyed making this for my craft room.

Omg look at him! I’m in love!!!

3D Mandala Grey Wolf – Layered SVG

To make this 3D Mandala Grey Wolf – Layered SVG project you will need:

Cricut Maker

Cricut design space

Cardstock

White Cardstock

Grey Cardstock

Black Cardstock

Blue cardstock

Glitter cardstock (if using)

I chose the colours from the Grey Coloured Paper Pad A4 24 Pack from hobbycraft. They have loads of lovely colours in this range. For the wolfs eyes I used a scrap piece of blue card I had lying around.

Link to the Grey Coloured Paper Pad A4 24 Pack: https://www.hobbycraft.co.uk/grey-coloured-paper-pad-a4-24-pack/650960-1008

Link to Silver Glitter Effect Card A4 16 Sheets: https://www.hobbycraft.co.uk/silver-glitter-effect-card-a4-16-sheets/650592-1001?_br_psugg_q=glitter+card

Adhesive Spray

I used adhesive spray for this project. This gives a flat kind of look to the project.

(NOTE: Open the window and cover your workspace, this spray smells really strong and even though I had a A3 pad covering my workspace it still got everywhere lol).

The adhesive spray that I used is not showing online but I bought from Hobbycraft and it was called ‘Permanent Adhesive Spray 200ml’

Adhesive Foam Pads

For a more 3D look I used foam pads in between the layers. (NOTE: try to hide the foam pads under each layer by cutting them to size so you can’t see them). Link:

https://www.hobbycraft.co.uk/white-adhesive-foam-pads-5mm-x-5mm-x-2mm-440-pieces/606178-1000

(I am not affiliated with hobbycraft, I just love their stuff lol)

Blue Light Grip Cricut Mat

I used the blue light grip mat for all the layers.

3D Mandala Letter SVG (link below)

I found this great mandala SVG from a private Facebook group –

https://www.facebook.com/groups/CricutExploreAndMore/?ref=share

All credit goes to their designer for this fantastic design.

3D Mandala Grey Wolf - Layered SVG
3D Mandala Grey Wolf – Layered SVG

Settings:

Cricut settings

I made the SVG smaller to fit the paper I had – 20cm wide x 18.5cm length.

Material setting for all layers – LIGHT CARDSTOCK – 60lb (163gsm)

Material setting for glitter cardstock – HEAVY CARDSTOCK – (250GSM)

NOTE: there may be better settings but these are the ones that worked for me.

3D Mandala Grey Wolf - Layered SVG - Glitter Effect
3D Mandala Grey Wolf – Layered SVG – Glitter effect

Check out my other posts for more 3D Mandala Letter SVG links and more: