Posted on Leave a comment

Little Crochet Pumpkin Pattern – Free

Little Crochet Pumpkin Pattern

Little Crochet Pumpkin Pattern – Free

Created by ©BeejuiCreations 2018-2021

Little Crochet Pumpkin Pattern
Little Crochet Pumpkin Pattern – Free

Little Crochet Pumpkin Pattern – Free. Feeling very Autumnal outside today so I got my crochet hooks out and made a cute little crochet pumpkin. Look how cute he is!

You could make this into a keyring or add a piece of ribbon / yarn to the top of the head, like I have, to hang it up or leave it as a small soft plushie, you choose!

Little Crochet Pumpkin Pattern - Free
Little Crochet Pumpkin Pattern – Free

Little Crochet Pumpkin Pattern you will need:

(I’m unsure of the amount I used but it was less than 25g for the Jaffa and only a small amount of Cyprus & Black were needed)

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks.

Little Crochet Pumpkin Pattern
Little Crochet Pumpkin Pattern

Stitches / Abbreviations: (US Crochet)

  • MR – Magic Ring
  • SC – Single Crochet
  • HDC – Half Double Crochet
  • DC – Double Crochet
  • INC – Increase
  • DEC – Decrease
  • CH – Chain stitch
  • SS – Slip Stitch
  • St/Sts – Stitch / Stitches

Little Crochet Pumpkin Pattern – Jaffa Yarn 

  • Make a magic ring (MR)
  • 6sc into MR (6sts) – do not join to first stitch, carry on working in the round
  • Inc in each st x 6 (12sts)
  • 1sc, inc x 6 (18sts)
  • 2sc, inc x 6 (24sts)
  • 3sc, inc x 6 (30sts)
  • 4sc, inc x 6 (36sts)
  • 5sc, inc x 6 (42sts)
  • 6sc, inc x 6(48sts)
  • 7sc, inc x 6 (54sts)
  • 1Sc in each st x 9 rows (54sts)
  • 7sc, dec x 6 (48sts)
  • 6sc, dec x 6 (42sts)
  • 5sc, dec x 6 (36sts)
  • 4sc, dec x 6 (30sts)
  • 3sc, dec x 6 (24sts)
  • Start Stuffing with soft toy filling
  • 2sc, dec x 6 (18sts)
  • 1sc, dec x 6 (12sts)
  • Dec x 6 (6sts)
  • SS, Fasten off (leaving a long piece of yarn for making segments)

Using the long piece leftover after fastening off, thread a darning needle and sew straight through centre hole at the top to centre hole at the bottom. Bring thread up on outside of pumpkin and back through the top hole. Do this six times leaving a similar gap between each pumpkin segment.

Once you have six segments on the pumpkin, pull thread to tighten all segments to sort of squish it into a pumpkin shape. Once you are happy with the shape, sew into bottom of hole to secure and fasten off.

(Bring thread through pumpkin and cut off excess to hide leftover thread inside pumpkin).

Little Crochet Pumpkin Pattern
Little Crochet Pumpkin Pattern

Leaves & Stalk – Cyprus Yarn

  • Make a magic ring (MR)
  • 4sc into MR (4sts) do not join to first stitch, carry on working in the round
  • 1sc in each st x 3 rows (4sts) (stalk)
  • * Stop working in the round *
  • **Ch 6, SC into 2nd ch from Hook, HDC, DC, DC, HDC, SS into start of CH, SS into next st of stalk**
  • Repeat ** to ** twice more
  • Fasten off (leaving a long piece of yarn for sewing onto top of pumpkin)

Sew onto top of pumpkin.

If using yarn for a hanging the pumpkin, use left over strand of yarn from stalk. Sew through the stalk and repeat with the beginning tail of yarn, tie these together at stalk. Measure approximately 10cm in length to ends of yarn and knot to form a loop.

Or attach a keyring attachment.

Using black yarn, sew on a cute face.

I hope you have enjoyed making your very own Cute Little Pumpkin .  I would love to see your makes, leave me a photo in the comments!

Follow my blog by joining my email list

Check out my other amigurumi patterns –

If you need any further guidance please contact me at Beejui Creations. Or would like to show your appreciation for this pattern please feel free to buy me a coffee 🙂

Donation

Show your appreciation of my content and buy me a coffee 🙂 Thanks for supporting small businesses.

£1.00

Notice: This pattern is for personal use ONLY. This pattern or parts of it must not be reproduced or published (printed or online), altered, resold or used for commercial purposes without authorization.

Do not copy, sell or translate any of the images on this page without authorisation. You can share to Social Media but please link back to this page. Thank you.

Copyright © Beejui Creations 2018 – 2021. All Rights Reserved.

Posted on 2 Comments

Character Keyring Crochet Pattern – Free

Character Keyring Crochet Pattern

Character Keyring Crochet Pattern – Free Crochet / Amigurumi Pattern

Character Keyring Crochet Pattern – Free Crochet / Amigurumi Pattern.  This pattern was designed because I just love him. He’s so adorable! I have a bobblehead of him in my car and he makes me smile daily.

You could make this into a keyring like I have, add a ribbon to the top of the head or leave it as a small soft plushie, you choose!

For the Character Keyring Crochet Pattern you will need:

  • 3.5mm / 4mm crochet hook (depending on how tight you crochet, I used a 3.5mm)
  • DK yarn in
    • Black Stylecraft Special DK yarn from Deramores – https://tidd.ly/385q5aU
    • (I’m unsure of the amount I used but it was less than 50g of each)
  • Soft toy filling
  • Darning needle to sew it all together
  • Keyring attachment (if using)

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks.

Stitches / Abbreviations: (US Crochet)

  • MR – Magic Ring
  • SC – Single Crochet
  • INC – Increase
  • DEC – Decrease
  • SK – Skip Stitch
  • SS – Slip Stitch
  • St/Sts – Stitch / Stitches

Character Keyring Crochet Pattern – Head (made in 2 parts) – Beige Yarn 

The completed project is made up of two patterns. The body is my pattern but the pattern for the head is not my design, it came from this fab designer: blog.twinkiechan.com/2014/08/13/baby-groot/#more-5970 

I have tweaked the original pattern slightly (see below) but credit still goes to the above – Thank You! 

Character Keyring Crochet Pattern
Character Keyring Crochet Pattern

Head Part A

Make a magic ring (MR), 6SC into MR (6sts) do not join to first stitch, carry on working in the round

INC in each st x 6 (12sts)

1SC, INC x 6 (18sts)

2SC, INC x 6 (24sts)

7SC, INC x 3 (27sts)

1SC in each st (27sts) x 5 rows

SS – Do Not Fasten Off

Broken-wood head accents

You’ll be crocheting triangular-ish and rectangular-ish shapes, and then slip stitching down one side of each shape to get your hook back to the head. We do this so we don’t have to break off and rejoin over and over again to continue our work. I broke each shape into different paragraphs so that they are easier to see and organize.

Character Keyring Crochet Pattern – Continue Pattern

Ch 1, 3 sc evenly. Ch 1, turn. 3 sc evenly. Ch 1, turn. Sk 1 st, 2 sc evenly. Sl st down the side of the rows you just worked until you are about to work into the head again.

4 sc evenly. Ch 1, turn. 4 sc evenly. Ch 1, turn. Sk 1 st,  1 sc, sk 1 st, 1 sc. Ch 1, turn. Sk 1 st, 1 sc. Ch 1, turn. Sl st down the side of the rows you just worked until you are about to work into the head again.

4 sc evenly. Ch 1, turn. 4 sc evenly. Ch 1, turn. 3 sc, sk last st. Ch 1, turn. 3 sc. Ch 1, turn. Sk 1, 1 sc. Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 3 sc evenly. Ch1, turn. 1 sc, sk 1, sl st. Sl st down the side of the rows you just worked until you are about to work into the head again.

4 sc evenly. Ch 1, turn. 4 sc evenly. Ch 1, turn. Sk 1 st,  1sc, sk 1 st, 1 sc. Ch 1, turn. Sk 1 st, 1 sc. Ch 1, turn. Sl st down the side of the rows you just worked until you are about to work into the head again.

Character Keyring Crochet Pattern
Character Keyring Crochet Pattern

You should be able to see the ‘broken wood accents’ forming

3 sc evenly. Ch 1, turn. 3 sc evenly. Ch1, turn. sk 1, 2 sc.  Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 1 sc , sk 1, 1 sc. Ch1, turn. Sk 1, 1 sc. Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 3 sc evenly. Ch1, turn. 1 sc, sk 1, sl st. Sl st down the side of the rows you just worked until you are about to work into the head again.

SS into the head and fasten off. Weave in ends.

Now you’ll finish the top of the head. You’re just making a circle to cover the hole ( Head Part B)

Head Part B – Beige Yarn

Make a magic ring (MR), 6SC into MR (6sts) do not join to first stitch, carry on working in the round

INC in each st x 6 (12sts)

1SC, INC x 6 (18sts)

2SC, INC x 6 (24sts)

SS and fasten off.  Leaving 24 inches of yarn.  (For sewing to Part A of head)

Lightly stuff Head Part A.

Since Head Part B is 24 sts around and open hole of Head Part A is technically 27 sts around, you can’t sew stitch for stitch, so just sew it on as best you can and make it look good. I found that using a 27 st circle was too big for the opening.

You can use the top of Head Part A as a guide for sewing. While sewing, you also don’t want the head to look like it has Frankenstein stitches going all around it, so try to sew as invisible as you can. Put in more stuffing if needed.

The following continues as my pattern
Character Keyring Crochet Pattern
Character Keyring Crochet Pattern

Character Keyring Crochet Pattern – Body – Beige Yarn

Make a magic ring (MR), 6SC into MR (6sts) do not join to first stitch, carry on working in the round

INC in each st x 6 (12sts)

1SC, INC x 6 (18sts)

1SC in each st (18sts) x 5 rows

Separate the legs making a slip stitch in the other side of the body. Work legs separately. Working in 9sts each side.

1SC in each st (9sts) x 4 rows

Start Stuffing with soft toy filling

1SC, DEC x 3 (6sts)

SS, Fasten off and sew end of foot closed

Attach yarn to body for next leg and repeat

1SC in each st (9sts) x 4 rows

Start Stuffing with soft toy filling

1SC, DEC x 3 (6sts)

SS, Fasten off and sew end of foot closed

Character Keyring Crochet Pattern
Character Keyring Crochet Pattern

Arms (make 2) – Beige Yarn

Make a magic ring (MR), 6SC into MR (6sts) do not join to first stitch, carry on working in the round

1SC in each st (6sts) x 5 rows

SS, Fasten off and sew to body

Sew the head and arms to the body

Leaf Garland – Light Green Yarn

Ch 45, fasten off (leave long tails for sewing onto body)

Wrap around your character, sewing as you go
Character Keyring Crochet Pattern
Character Keyring Crochet Pattern

Sew the eyes and mouth on with black and white yarn

Sew the keyring attachment securely to the top of the character’s head.

I hope you have enjoyed making your very own Character Keyring Crochet Pattern – Free.  If you need any further guidance please contact me at Beejui Creations

Follow my blog by joining my email list

Do not copy, sell or translate any of the images on this page without authorisation. You can share to Social Media but please link back to this page. Thank you.

Copyright © Beejui Creations 2018 – 2021. All Rights Reserved.

Donation

Show your appreciation of my content and buy me a coffee 🙂 Thanks for supporting small businesses.

£1.00

Check out my other crochet keyrings:

Posted on 7 Comments

Bride Groom Character Keyring – Free Pattern

Bride Groom Character Keyring

Bride Groom Character Keyring

Free Pattern

This Bride Groom Character Keyring – Free Pattern was designed and inspired because I just love baby Groot.  He’s so adorable! To clarify I have a little bobblehead of him in my car and he definitely makes me smile daily.  When I was asked to make a wedding gift for two lovers of this character, I was so excited to have a chance to make them.

You could make these in any colour you choose, you could also use the same colour theme as the wedding party.  You can turn this Bride Groom Character Pattern into a keyring as I have for example. Or likewise, add a ribbon to the top of their heads or leave them as small soft plushies to use as a cake topper, you choose!

Bride Groom Character Keyring - Free Pattern

For your Bride Groom Character Keyring – Free Pattern you will need:

  • 3.5mm / 4mm crochet hook (depending on how tight you crochet, I used a 3.5mm)
  • DK yarn in:
    • (I’m unsure of the amount I used but it was less than 50g of each)
  • Soft toy filling
  • Darning needle to sew it all together
  • Keyring attachments (if using)

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks.

Bride Groom Character Keyring
Bride Groom Character Pattern

Stitches / Abbreviations: (US Crochet)

  • MR – Magic Ring
  • SC – Single Crochet
  • INC – Increase
  • DEC – Decrease
  • BLO – Back Loop Only
  • SK – Skip Stitch
  • SS – Slip Stitch
  • St/Sts – Stitch / Stitches
Bride Groom Character Keyring

Bride Groom Character Keyring – Free Pattern

Head (made in 2 parts) – Beige Yarn 

Use the same pattern for both the bride and the groom heads.  However, to make them slightly different I gave the bride eyelashes and added a small flower to her ‘hair’.

The completed project is actually made up of two different patterns. The body is my pattern but the pattern for the head is not my design, it came from this fab designer:  blog.twinkiechan.com/2014/08/13/baby-groot/#more-5970 

I have tweaked the original pattern below slightly but credit still goes to the above – Thank You! 

Head Part A

  • Make a magic ring (MR), 6SC into MR (6sts) but do not join to first stitch, carry on working in the round
  • INC in each st x 6 (12sts)
  • 1SC, INC x 6 (18sts)
  • 2SC, INC x 6 (24sts)
  • 7SC, INC x 3 (27sts)
  • 1SC in each st (27sts) x 5 rows
  • SS – Do Not Fasten Off

Now start working on the ‘broken’ head segments.

“You’ll be crocheting triangular-ish and rectangular-ish shapes, and then slip stitching down one side of each shape to get your hook back to the head. We do this so we don’t have to break off and rejoin over and over again to continue our work. I broke each shape into different paragraphs so that they are easier to see and organize.

Ch 1, 3 sc evenly. Ch 1, turn. 3 sc evenly. Ch 1, turn. Sk 1 st, 2 sc evenly. Sl st down the side of the rows you just worked until you are about to work into the head again.

4 sc evenly. Ch 1, turn. 4 sc evenly. Ch 1, turn. Sk 1 st,  1 sc, sk 1 st, 1 sc. Ch 1, turn. Sk 1 st, 1 sc. Ch 1, turn. Sl st down the side of the rows you just worked until you are about to work into the head again.

4 sc evenly. Ch 1, turn. 4 sc evenly. Ch 1, turn. 3 sc, sk last st. Ch 1, turn. 3 sc. Ch 1, turn. Sk 1, 1 sc. Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 3 sc evenly. Ch1, turn. 1 sc, sk 1, sl st. Sl st down the side of the rows you just worked until you are about to work into the head again.”

Keep going!

“4 sc evenly. Ch 1, turn. 4 sc evenly. Ch 1, turn. Sk 1 st,  1sc, sk 1 st, 1 sc. Ch 1, turn. Sk 1 st, 1 sc. Ch 1, turn. Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 3 sc evenly. Ch1, turn. sk 1, 2 sc.  Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 1 sc , sk 1, 1 sc. Ch1, turn. Sk 1, 1 sc. Sl st down the side of the rows you just worked until you are about to work into the head again.

3 sc evenly. Ch 1, turn. 3 sc evenly. Ch1, turn. 1 sc, sk 1, sl st. Sl st down the side of the rows you just worked until you are about to work into the head again.

SS into the head and fasten off. Weave in ends.”

http://blog.twinkiechan.com/2014/08/13/baby-groot/#more-5970

Finish the head by making a circle using head part B, see below:

Head Part B – Beige Yarn

  • Make a magic ring (MR), 6SC into MR (6sts) but do not join to first stitch, carry on working in the round
  • INC in each st x 6 (12sts)
  • 1SC, INC x 6 (18sts)
  • 2SC, INC x 6 (24sts)
  • SS and fasten off.  Leaving 24 inches of yarn.  (For sewing to Part A of head)

Lightly stuff Head Part A.

“Since Head Part B is 24 sts around and open hole of Head Part A is technically 27 sts around, you can’t sew stitch for stitch, so just sew it on as best you can and make it look good. I found that using a 27 st circle was too big for the opening. You can use the top of Head Part A as a guide for sewing. While sewing, you also don’t want the head to look like it has Frankenstein stitches going all around it, so try to sew as invisible as you can. Put in more stuffing if needed.”

http://blog.twinkiechan.com/2014/08/13/baby-groot/#more-5970

Bride Character Keyring Pattern

Body – White Yarn

  • Make a magic ring (MR),
  • 6SC into MR (6sts) but do not join to first stitch, carry on working in the round (6sts)
  • INC in each st x 6 (12sts)
  • 1SC, INC x 6 (18sts)
  • 1SC in each st (18sts) x 3 rows
  • 2SC, INC x 6 (24sts)
  • 1SC in each st (24sts) x 1 row
  • 3SC, INC x 6 (30sts)
  • 1SC in each st (30sts) x 1 row
  • BLO – 3SC, DEC x 6 (24sts)
  • 2SC, DEC x 6 (18sts)
  • 1SC, DEC x 6 (12sts) 
  • Start Stuffing with soft toy filling
  • DEC x 6 (6sts)
  • SS, Fasten off and sew to close

Attach the yarn to body in the front loops where you made the BLO

  • 3SC in each front loop stitch to end (this makes a frill around bottom of dress)
  • SS, Fasten off and weave in ends

Bride’s Arms (make 2) – Beige Yarn

  • Make a magic ring (MR), 6SC into MR (6sts) but do not join to first stitch, carry on working in the round
  • 1SC in each st (6sts) x 5 rows
  • SS, Fasten off and sew to body (no need to stuff)
Bride Groom Character Keyring - Free Pattern
Bride Groom Character Keyring – Free Pattern

Groom Character Keyring Pattern

Body – Grey Yarn

  • Make a magic ring (MR), 6SC into MR (6sts) but do not join to first stitch, carry on working in the round
  • INC in each st x 6 (12sts)
  • 1SC, INC x 6 (18sts)
  • 1SC in each st (18sts) x 5 rows
Separate the legs making a slip stitch in the other side of the body. Work legs separately. Working in 9sts each side.
  • 1SC in each st (9sts) x 3 rows
  • Start Stuffing with soft toy filling
  • * Change to black yarn *
  • 1SC in each st (9sts) x 1 row
  • 1SC, DEC x 3 (6sts)
  • SS, Fasten off and sew end of foot closed
Attach the grey yarn to body for the next leg and repeat for the other leg
  • 1SC in each st (9sts) x 3 rows
  • Start Stuffing with soft toy filling
  • * Change to black yarn *
  • 1SC in each st (9sts) x 1 row
  • 1SC, DEC x 3 (6sts)
  • SS, Fasten off and sew end of foot closed

Sew a ‘V’ shape in white to the front of the jacket to look like a shirt.

Groom’s Arms (make 2) – Grey Yarn

  • Make a magic ring (MR), 6SC into MR (6sts) but do not join to first stitch, carry on working in the round
  • 1SC in each st (6sts) x 4 rows
  • * Change to beige yarn *
  • 1SC in each st (6sts) x 1 row
  • SS, Fasten off, sew to the body and weave in the ends

Sew both bride and groom’s heads and arms to their bodies

Leaf Garland Accents on Head – Light Green Yarn

  • Sew accents on both the bride and the groom’s heads by making a couple of stitches onto the ‘broken’ bits. (see pic below)

Flower Accents for Bride

  • CH2, in 1st ch 4SC
  • Fasten off and leave a long strand for sewing

Make 3 in red (bouquet) 

  • Sew all together then sew to hand with light green yarn

Make 1 in white (hairpiece)

  • Sew to the side of the bride’s head, just below a ‘broken’ part of the head
Bride Groom Character Keyring - Free Pattern
Bride Groom Character Keyring

Sew the eyes and the mouth on both bride and groom with black and white yarn.  In addition, add lashes to bride to make her pretty.

Tie a bow around each of their necks with a strand of yarn.  

  • Use red yarn to make a front facing bow for the groom to look like a bow tie.
  • Use white yarn with back facing bow for the bride to make a pretty bow.

Sew keyring attachment (if using) securely to the top of both the bride and groom’s head.

Bride Groom Character Keyring

All completed!

I hope you have enjoyed making your very own Bride Groom Character keyrings.  I would love it if you could share a picture of your creations and link back to this pattern if shared elsewhere, thank you.

If you need any further guidance please contact me at Beejui Creations

Follow my blog by joining my email list

Check out more Amigurumi patterns:

Donation

Show your appreciation of my content and buy me a coffee 🙂 Thanks for supporting small businesses.

£1.00

Posted on Leave a comment

Flossy Flamingo Keyring Pattern – Free Crochet Pattern

Flossy Flamingo Keyring Pattern

Flossy Flamingo Keyring Pattern – Free Crochet Pattern

Created by ©BeejuiCreations 2018-2021

Flossy Flamingo Keyring Pattern – Free Crochet. Following on from the flamingo I made back in April. I give you the miniature keyring version.

This Flossy Flamingo Keyring Pattern was designed for a flamingo lover friend who requested a custom made flossy the flamingo keyring. You could make it into a keyring like I have, add ribbon to the top of the head or leave it as a small soft plushie, you choose!

Flossy Flamingo Keyring Pattern - Free Crochet Pattern
Flossy Flamingo Keyring Pattern

Flossy Flamingo Keyring Pattern – You will need: 

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks.

Stitches / Abbreviations: (US Crochet) 

  • MR – Magic Ring
  • SC – Single Crochet
  • DC – Double Crochet
  • HDC – Half Double Crochet
  • INC – Increase
  • DEC – Decrease
  • SS – Slip Stitch
  • St/Sts – Stitch / Stitches

Flossy Flamingo Keyring Pattern – Head – Pink yarn

  1. Make a magic ring (MR)
  2. 6sc into MR (6sts) – do not join to first stitch, carry on working in the round
  3. Inc in each st x 6 (12sts)
  4. 1sc, INC x 6 (18sts)
  5. 2sc, INC x 6 (24sts)
  6. – 9. 1Sc in each st (24sts) (4rows)
  1. 2sc, DEC x 6 (18sts)
  2. 1sc, DEC x 6 (12sts)
  3. Start Stuffing with soft toy filling
  4. DEC x 6 (6sts)
  5. SS, Fasten off (leaving a long piece of yarn for sewing together)

Flossy Flamingo Keyring Pattern – Beak – Black yarn

  1. Make a magic ring (MR)
  2. 4SC into MR (4sts) do not join to first stitch, carry on working in the round
  3. 1SC, INC x 2 (6sts)
  4. 2SC, INC x 2 (8sts)
  5. 1SC in next 2 sts, 1HDC in next 4sts, 1SC in next 2sts (8sts)
  6. INC in next st, 1SC in next st, 1HDC in next 4sts, 1SC in next st, INC in next  st (10sts)
  7. 1SC in each st (10sts)

* Change colour to white yarn * 

  1. – 9. 1SC in next 2sts, 1HDC in next 6sts, 1SC in next 2sts (10sts) (2 rows)
  1. 1SC in each st (10sts)
  2. Slip stitch. Fasten off (leaving a long piece of yarn for sewing together) and stuff the  beak lightly with soft toy filling then sew to the head
Flossy Flamingo Keyring Pattern
Flossy Flamingo Keyring Pattern

Flossy Flamingo Keyring Pattern – Body – Pink yarn

  1. Make a magic ring (MR)
  2. 6SC into MR (6sts) do not join to first stitch, carry on working in the round
  3. INC in each st x 6 (12sts)
  4. 1SC, INC x 6 (18sts)
  5. – 7. 1SC in each st (18sts) (3 rows)
  1. 7SC, DEC x 2 (16sts)
  2. 6SC, DEC x 2 (14sts)
  3. 5SC, DEC x 2 (12sts)

Start Stuffing with soft toy filling

  1. 4SC, DEC x 2 (10sts)
  2. 3SC, DEC x 2 (8sts)
  3. 2SC, DEC x 2 (6sts)
  4. 1SC, DEC x 2 (4sts)
  5. SS, Fasten off (leaving a piece of yarn for sewing)

Flossy Flamingo Keyring Pattern – Neck – Pink yarn

  1. CH 8 (8sts), j​oin to first CH, carry on working in the round
  2. SC into each st x 60sts
  3. SS, Fasten off (leaving a long piece of yarn for sewing together)
  4. Stuff firmly when sewing to head and body
Flossy Flamingo Keyring Pattern
Flossy Flamingo Keyring Pattern

Flossy Flamingo Keyring Pattern –

Tail feathers – 1 Central & 2 Side Feathers

Central feather – Pink yarn (Make 1)

  1. CH 10. In 3rd CH from hook work 1DC in next 3sts, 1HDC in next 2sts, 1SC in next 2sts, 1SS in last st. Turn and work in other side of CH
  2. 1SC in next 2sts, 1HDC in next 2sts, 1DC in next 3 sts
  3. SS, Fasten off (thread the left over yarn through middle of the feather and knot at bottom to the beginning yarn)

Side feathers – Pink Yarn (Make 2)

  1. CH 8. In 2nd CH from hook work 1SS, 1SC in next 2sts, 1HDC in next 2sts, 1DC in next 2sts
  2. SS, Fasten off (leaving a long piece of yarn for sewing together)
Flossy Flamingo Keyring Pattern
Flossy Flamingo Keyring Pattern

Flossy Flamingo Keyring Pattern –

Wings – Pink yarn (make 2)

  1. Make a magic ring (MR)
  2. 6SC into MR (6sts) do not join to first stitch, carry on working in the round
  3. 1SC, INC x 3 (9sts)
  4. 1SC in each st x 9 (9sts)
  5. DEC, 1SC in next 7sts (8sts)
  6. DEC, 1SC in next 6sts (7sts)
  7. Continue, DEC, 1SC in next 5sts (6sts)
  8. DEC, 1SC in next 4sts (5sts)
  9. SS, Fasten off (leaving a long piece of yarn for sewing together)

Flatten wing and continue with wing feathers

Wing feathers – Black yarn (complete on both wings*)

  1. Attach yarn with a SS to corner of the wing
  2. SC in each st (8sts), TURN * DO NOT WORK IN THE ROUND * 
  3. In 1st st, CH 2, SS into 2nd CH from hook, SS into next st
  4. CH3, SS into 2nd CH from hook, SS into next st
  5. CH4, SS into 2nd CH from hook, SS into next st
  6. CH4, SS into 2nd CH from hook, SS into next st
  7. CH5, SS into 2nd CH from hook, SS into next st
  8. CH5, SS into 2nd CH from hook, SS into next st
  9. CH6, SS into 2nd CH from hook, SS into next st
  10. Fasten off & weave in ends

* For other wing, work backwards ie ch6 row first, working back to ch2 row*   

Flossy Flamingo Keyring Pattern

Flossy Flamingo Keyring Pattern –

Legs – White yarn (make 2)

  1. CH 11
  2. SS into 4th st from hook, * CH 3, SS back into same st * repeat * – * two more times then SS in each CH back towards beginning
  3. Fasten off & weave in end

Next:

Sew all pieces together.

Sew eyes in black yarn onto the flamingo’s face.

Flossy Flamingo Keyring Attachment, if using:

Sew keyring attachment securely to the top of the flamingo’s head.

I hope you have enjoyed making your very own Flossy the Flamingo keyring. If you need any further guidance please contact me.

Let me know if there are any issues with the pattern, or anything you don’t understand.

Also, if you make one (or more!) please leave a picture in the comments and link back to this page.

Follow my blog by joining my email list

Notice: This pattern is for personal use ONLY. This pattern or parts of it must not be reproduced or published (printed or online), altered, resold or used for commercial purposes without authorization.

Do not copy, sell or translate any of the images on this page without authorisation. You can share to Social Media but please link back to this page. Thank you.

Copyright © Beejui Creations 2018 – 2021. All Rights Reserved.

Check out more Amigurumi patterns:

Donation

Show your appreciation of my content and buy me a coffee 🙂 Thanks for supporting small businesses.

£1.00

Posted on Leave a comment

Crochet Owl Keyring Pattern – Free Link

Crochet Owl Keyring Pattern – Free Link.

This pattern is easy to follow and I had so much fun creating this project. I hope you enjoy it as much as I did.

This could be made into the keyring shown or used as a handbag charm.

Crochet Owl Keyring Pattern with feet
Crochet Owl Keyring Pattern with Feet

Crochet Owl Keyring Pattern

Materials I used on this project:

I used a 3.5mm crochet hook, but you could probably get away with using a 3mm or 4mm depending on what type of yarn used.

The yarn I used is Stylecraft Special DK yarn –

Aspen – Stylecraft Special DK yarn from Deramores – https://tidd.ly/385q5aU

White – Stylecraft Special DK yarn from Deramores – https://tidd.ly/385q5aU

Grey – Stylecraft Special DK yarn from Deramores – https://tidd.ly/385q5aU

I used less than 50g of all the Aspen, Grey and White yarn.

The best soft toy filling I have found is from Hobbycraft. It’s usually on offer, so the more you buy the cheaper the price – https://www.hobbycraft.co.uk/soft-toy-filling-200g/630191-1000?_br_psugg_q=soft+toy+stuffing

Keyring attachment (if using) – https://www.kydproducts.co.uk/40mm-spring-hook-with-25mm-splitring-nickel-plated

Darning needle to sew it all together

The buttons for the eyes and the beads were from my craft stash and I can’t remember where I bought them from.

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks.

Crochet Owl Keyring Pattern - Back
Crochet Owl Keyring – Back

Stitches / Abbreviations: (US Crochet) 

  • MR – Magic Ring
  • SC – Single Crochet
  • INC – Increase
  • DEC – Decrease
  • SS – Slip Stitch
  • St/Sts – Stitch / Stitches

Crochet Owl Keyring Pattern – Free Link

NOTE: This is not my pattern.

This is made from two different patterns. Both patterns are from Amigurumi Today and you may have to create an account to access them.

Owl Pattern link:

https://amigurumi.today/amigurumi-owl-keychain-pattern/

Feet Pattern link:

https://amigurumi.today/crochet-baby-flamingo-amigurumi-pattern/

All credit goes to the pattern designer.

I did tweak it as always! I made small crochet eyes by working below pattern (make 2)

  • Make a magic ring (MR)
  • 6sc into MR (6sts) – do not join to first stitch, carry on working in the round
  • Inc in each st x 6 (12sts)
  • SS, Fasten off (leaving a long piece of yarn for sewing onto the face)

Sew a small button onto the circle, then sew them onto body of owl.

Attach beads to keyring chain and attached to head.

Crochet Owl - Side
Crochet Owl Keyring – Side

It turned out a bit quirky but I like it!

I hope you have enjoyed making your very own Crochet Owl Keyring Pattern.  I would love to see your makes, leave me a photo in the comments!

Follow my blog by joining my email list

Check out more amigurumi patterns –

Do not copy, sell or translate any of the images on this page without authorisation. You can share to Social Media but please link back to this page. Thank you.

Copyright © Beejui Creations 2018 – 2021. All Rights Reserved.