Posted on Leave a comment

New Home Personalised Ornaments

New Home Personalised Ornaments

New Home Personalised Ornaments

Created by ©BeejuiCreations 2018-2022

New Home Personalised Ornaments
New Home Personalised Ornaments

New Home Personalised Ornaments – Love love love these! They’ll look gorgeous on the Christmas tree this year.

To clarify this Christmas ornament project was created on a Cricut Maker.

New Home Personalised Ornaments


Firstly, you will need an acrylic blank ornament. The ornament shown in the pictures for example, is a mirrored or white 8cm Acrylic 3mm thick circle from Woodform Crafts. Here is the link:

Rose Gold Mirrored –

White –

Secondly, you will need a Cricut machine – Shop Cricut and you will need to customise the file in Cricut Design Space – Cricut Design Space™. Subsequently, to access this you may need a Cricut Access subscription. Link to my file:

Note: This design file contains a non-Cricut font for Christmas and the names. You can change the font to one you already have access to, or download the font I have used. The font used is called ‘Alberto’ and you can download this free from, here is the link:

Before clicking ‘Make it’ hide the 8cm back circle and select all of the design, then WELD.

Furthermore, you will also need a 10cm piece of permanent vinyl for this project. This is the link for the vinyl I have used in this project (I used the black sheets out of this pack)

This post contains affiliate links. If you use these links to buy something I may earn a commission. Thanks.

New Home Personalised Ornaments
New Home Personalised Ornaments


Start the project by loading the Cricut machine with the mat and vinyl then press start to cut. Above all please make sure that you use the correct material settings for the vinyl being used.

As soon as the Cricut has finished cutting, eject the mat and carefully remove the cut vinyl sheet. At this stage you can proceed to weed your design.

TIP: for small writing, intricate designs etc. place transfer tape over the whole design before weeding it. Turn the design over, take the backing paper off and weed straight off of the transfer sheet. As a result this keeps all the tiny letters firmly stuck down and stops them moving about.

Lastly, you will need approximately 15cm of ribbon or cord to make the hanger for your ornament. I prefer the cord for a neater finish, links for both the cord and organza ribbon are below:

Cord –

Organza ribbon –

Furthermore if you don’t use or have a Cricut machine, these Acrylic Ornaments are for sale in my facebook shop Beejui Creations | Facebook

Follow my blog by joining my email list

Check out my other designs of Acrylic Ornament Posts:

Notice: This design file is for personal use ONLY. This file or parts of it must not be reproduced or published (printed or online), altered, resold or used for commercial purposes without authorization.

Do not copy, sell or translate any of the images on this page without authorisation. You can share to Social Media but please link back to this page. Thank you.

Copyright © Beejui Creations 2018 – 2022. All Rights Reserved.